- Simonk avrisp driver drivers#
- Simonk avrisp driver software#
- Simonk avrisp driver windows 7#
- Simonk avrisp driver series#
You don' t want to let go and have the tool disconnect half way through the flashing procedure - that might mess things up quite badly. Alternatively you can try and slice it neatly down the side and then reuse it with a bit of tape but this doesn' t look quite so nice.Ī small amount of blue tack can be used to hold the Electronic speed controller down firmly so it doesn' t move whilst you do the flashing. You will need to remove the heatshrink from your Electronic Speed Controller to access the ATMEL chip on the underside so you will probably want to have some new heatshrink ready to replace the stuff you remove.
Simonk avrisp driver software#
Now you should have all the software and hardware that you need to get going. New versions are released periodically - it' s probably best to get the latest (at the top) unless you know of any problems with this version, then try the next one down. Looking at the document I can see that I need to flash the ' bs_nfet.hex' file which will be included in the download found here It' s worth looking closely at the document because there are different individual files for different Electronic Speed Controllers and if you pick the wrong one you could damage your speed controller. This document has a list of the different common Electronic Speed controllers that people like to flash Īs well as including links to the firmware itself. Not all electronic speed controllers use the ATMEL chip but many do. This is the improved firmware that you will be uploading to your electronic speed controller to improve it' s responsiveness and remove ' features' that work well for planes and conventional aircraft but are not so good with multirotors, like the low voltage cut off which will save your lithium polymer battery but destroy your quadcopter. You will need to download the latest version of the SimonK firmware. It works great for flashing Electronic Speed Controllers This bit of software (and the previous hardware too) can be used for all sorts of ATMEL based flashing activities, including but not limited to upgrading the firmware on the KK1 and KK2 flight control boards and upgrading the turnigy 9x to the er9x firmware (and others). I like to use the ' lazyzero KKMulticopter Flashtool'.
You then need the right software to use with the USBasp programmer.
The Atmega Socket Firmware Flashing Tool simply plugs into the USBasp AVR Programming Device.
Simonk avrisp driver windows 7#
You may want to read this website which includes instructions and links for for windows 7 and Vista 圆4 Īnd if you want to make your life easy the Atmega Socket Firmware Flashing Tool allows you to connect the programmer straight to the ATMEL chip on the Electronic Speed Controller without having to do any clever soldering or fiddling around with making your own flash tool
Simonk avrisp driver drivers#
The drivers needed to use this can be fiddly to install. In order to access the pins on the chip you need a USB programmer (USBasp AVR Programming Device) These speed controllers use the ATMEL processor chip which is quite common and relatively easy to flash with the SimonK improved multirotor specific firmware.
Simonk avrisp driver series#
I am just about to flash a bunch of hobbyking 12 amp blue series Electronic Speed Controllers įor the stunt quadcopter i am currently building and i thought I would try and write out a simple tutorial to help others looking to do the same thing.
0 kommentar(er)
